# Found any cool .STL files? Share them here **URL:** \ **Category:** 3D Printing\ **Created:** [12 January 2022 21:28 UTC](https://greyarro.ws/t/found-any-cool-stl-files-share-them-here/41375 "2022-01-12T21:28:37Z")\ **Posts on this page:** 20\ **Page:** 2
**Author:** ![harmchar](https://greyarro.ws/user_avatar/greyarro.ws/harmchar/32/33279_2.png) [@harmchar](https://greyarro.ws/u/harmchar)\ **Post date:** [22 February 2022 17:27 UTC](https://greyarro.ws/t/found-any-cool-stl-files-share-them-here/41375/21 "2022-02-22T17:27:44Z")
that is a quality looking print there. My cheap ass printer doesn’t give anything like that quality. What type hot end and nozzle is that you’re using if you don’t mind me asking. ---
**Author:** ![DeanoG60](https://greyarro.ws/user_avatar/greyarro.ws/deanog60/32/60175_2.png) [@DeanoG60](https://greyarro.ws/u/DeanoG60)\ **Post date:** [22 February 2022 17:49 UTC](https://greyarro.ws/t/found-any-cool-stl-files-share-them-here/41375/22 "2022-02-22T17:49:26Z")
> [@harmchar](#): > > What type hot end and nozzle is that you’re using The standard hotend on the Ender3 pro with a .4 nozzle 👍🏻 it was printed using Prusaslicer’s Vase mode 🙂 > [@harmchar](#): > > I have one printing now, should be finished at 20:30 tonight. (12hr print) Be sure to post your results 👍🏻 😁 ---
**Author:** ![harmchar](https://greyarro.ws/user_avatar/greyarro.ws/harmchar/32/33279_2.png) [@harmchar](https://greyarro.ws/u/harmchar)\ **Post date:** [22 February 2022 17:57 UTC](https://greyarro.ws/t/found-any-cool-stl-files-share-them-here/41375/23 "2022-02-22T17:57:02Z")
haha, only if quality improves. Had a quick look in the garage earlier and there is a lot of stringing. Using PETG and don’t thing I had the nozzle temp high enough at start. Have boosted it up to 240 degrees now. Might look into the Prusa slicer to see if my one can run it. Usi.ng Cura just now ---
**Author:** ![DeanoG60](https://greyarro.ws/user_avatar/greyarro.ws/deanog60/32/60175_2.png) [@DeanoG60](https://greyarro.ws/u/DeanoG60)\ **Post date:** [22 February 2022 18:02 UTC](https://greyarro.ws/t/found-any-cool-stl-files-share-them-here/41375/24 "2022-02-22T18:02:29Z")
> [@harmchar](#): > > Using PETG and in the garage Is your filament kept dry? I’ve only ever printed with PLA PLA+ and TPU so im not to sure about settings for PETG. ---
**Author:** ![harmchar](https://greyarro.ws/user_avatar/greyarro.ws/harmchar/32/33279_2.png) [@harmchar](https://greyarro.ws/u/harmchar)\ **Post date:** [22 February 2022 18:18 UTC](https://greyarro.ws/t/found-any-cool-stl-files-share-them-here/41375/25 "2022-02-22T18:18:57Z")
No, that is something I am guilty of is leaving the spool attached for long periods. Dont think the PETG is as bad as PLA for moisture absorbing, but I probably should store it in my vacuum bags. ---
**Author:** ![gimbalflight](https://greyarro.ws/user_avatar/greyarro.ws/gimbalflight/32/73915_2.png) [@gimbalflight](https://greyarro.ws/u/gimbalflight)\ **Post date:** [7 March 2022 19:11 UTC](https://greyarro.ws/t/found-any-cool-stl-files-share-them-here/41375/26 "2022-03-07T19:11:02Z")
For anyone interested in mounting Strobon Crees to their drones there are a few mounts on Thingiverse. > **[Search Thingiverse - Thingiverse](https://www.thingiverse.com/search?q=strobon%2BCree&type=things&sort=relevant)** > > Download files and build them with your 3D printer, laser cutter, or CNC. Thingiverse is a universe of things. ---
**Author:** ![DeanoG60](https://greyarro.ws/user_avatar/greyarro.ws/deanog60/32/60175_2.png) [@DeanoG60](https://greyarro.ws/u/DeanoG60)\ **Post date:** [11 March 2022 16:22 UTC](https://greyarro.ws/t/found-any-cool-stl-files-share-them-here/41375/27 "2022-03-11T16:22:56Z")
For anybody into the mandalorian here is a quality print for you: > **[The Mandalorian Remix for Silk Filament by RonX666](https://www.thingiverse.com/thing:4689374/files)** > > The Mandalorian Remix for Silk Filament > Da sich Silk Filament immer stark zusammen zieht und die Schichthaftung auch nicht so stark ist, habe ich einen kleinen Remix gemacht. > Nachfolgendes wurde neben dem Coaster noch... Whats special about this print is it doesn’t require any suports. Print it with a 0.12 layer height and it will print fine without the need for supports. Here is a pic of my print, printed in Sunlu Silk silver PLA. ![20220311_084437](https://d1q8cepst0v8xp.cloudfront.net/original/3X/3/d/3d01fda53c9da022d43bd4ab018bc61c52baab65.jpeg) It took 16 hours and 39 minutes to print. ---
**Author:** ![DazC](https://greyarro.ws/user_avatar/greyarro.ws/dazc/32/201328_2.png) [@DazC](https://greyarro.ws/u/DazC)\ **Post date:** [17 March 2022 13:39 UTC](https://greyarro.ws/t/found-any-cool-stl-files-share-them-here/41375/28 "2022-03-17T13:39:45Z")
Came accross an stl for a dust cover for mini2. Ill be printing one when i get home at the weekend. > **[DJI Mini 2 USB dust cover by DorinDXN](https://www.thingiverse.com/thing:4671345)** > > For DJI Mini 2, a simple USB and uSD dust cover. > Update: feb 13th 2021 > Added a deeper variant (3), with and without cut, > it should stay better and have less chances to be lost. > It is a precise print, after print please use a nail file to polish out... ---
**Author:** ![PingSpike](https://greyarro.ws/user_avatar/greyarro.ws/pingspike/32/7393_2.png) [@PingSpike](https://greyarro.ws/u/PingSpike)\ **Post date:** [4 April 2022 19:53 UTC](https://greyarro.ws/t/found-any-cool-stl-files-share-them-here/41375/29 "2022-04-04T19:53:32Z")
Split this topic on 4 April 2022 19:53 UTC 3 posts were merged into an existing topic: [Could someone 3D print something for me please?](https://greyarro.ws/t/could-someone-3d-print-something-for-me-please/2975/194) ---
**Author:** ![Earwig](https://greyarro.ws/user_avatar/greyarro.ws/earwig/32/112833_2.png) [@Earwig](https://greyarro.ws/u/Earwig)\ **Post date:** [4 April 2022 20:46 UTC](https://greyarro.ws/t/found-any-cool-stl-files-share-them-here/41375/30 "2022-04-04T20:46:58Z")
I thought I’d print something other than drone parts so I’ve started work on this… > **[Flying Fish](https://cults3d.com/en/3d-model/art/flying-fish)** > > Flying Fish > > Flying fish live in the warm waters of the tropical and subtropical surface waters. They live in groups and have a habit of swim. They are mainly fed with zooplankton, but they are also an important food source for a large migratory... ---
**Author:** ![DeanoG60](https://greyarro.ws/user_avatar/greyarro.ws/deanog60/32/60175_2.png) [@DeanoG60](https://greyarro.ws/u/DeanoG60)\ **Post date:** [4 April 2022 20:50 UTC](https://greyarro.ws/t/found-any-cool-stl-files-share-them-here/41375/31 "2022-04-04T20:50:10Z")
Wow a lot of parts in that 👍🏻 look forward to seeing the end result 👌🏻 ---
**Author:** ![Earwig](https://greyarro.ws/user_avatar/greyarro.ws/earwig/32/112833_2.png) [@Earwig](https://greyarro.ws/u/Earwig)\ **Post date:** [6 April 2022 14:34 UTC](https://greyarro.ws/t/found-any-cool-stl-files-share-them-here/41375/32 "2022-04-06T14:34:19Z")
> [@DeanoG60](#): > > the end result ![IMG_20220406_152358](https://d1q8cepst0v8xp.cloudfront.net/original/3X/9/6/966ed04062551807717be464bbaa97c9a1a42367.jpeg) About 16hrs of printing. The tolerances are very tight. Even after a lot of work with sandpaper there’s too much friction in the system for the poxy little spiral spring to have enough power to lift it. It moves smoothly enough with manual intervention though. ---
**Author:** ![DeanoG60](https://greyarro.ws/user_avatar/greyarro.ws/deanog60/32/60175_2.png) [@DeanoG60](https://greyarro.ws/u/DeanoG60)\ **Post date:** [6 April 2022 15:51 UTC](https://greyarro.ws/t/found-any-cool-stl-files-share-them-here/41375/33 "2022-04-06T15:51:29Z")
Looks cool though 😁 awesome work 👍🏻 ---
**Author:** ![notveryprettyboy](https://greyarro.ws/user_avatar/greyarro.ws/notveryprettyboy/32/144159_2.png) [@notveryprettyboy](https://greyarro.ws/u/notveryprettyboy)\ **Post date:** [6 April 2022 15:55 UTC](https://greyarro.ws/t/found-any-cool-stl-files-share-them-here/41375/34 "2022-04-06T15:55:46Z")
> [@Earwig](#): > > It moves smoothly enough with manual intervention though. Bit of silicon grease? ---
**Author:** ![PingSpike](https://greyarro.ws/user_avatar/greyarro.ws/pingspike/32/7393_2.png) [@PingSpike](https://greyarro.ws/u/PingSpike)\ **Post date:** [7 April 2022 10:49 UTC](https://greyarro.ws/t/found-any-cool-stl-files-share-them-here/41375/35 "2022-04-07T10:49:09Z")
Split this topic on 7 April 2022 10:49 UTC 31 posts were split to a new topic: [Printing keyrings](https://greyarro.ws/t/printing-keyrings/44708) ---
**Author:** ![DeanoG60](https://greyarro.ws/user_avatar/greyarro.ws/deanog60/32/60175_2.png) [@DeanoG60](https://greyarro.ws/u/DeanoG60)\ **Post date:** [6 April 2022 19:58 UTC](https://greyarro.ws/t/found-any-cool-stl-files-share-them-here/41375/53 "2022-04-06T19:58:41Z")
Anyways keeping on topic lol Here is the link to the STL for the Nike jordan ones key chain: > **[Nike Air Jordans Model Shoes by chrisreillyuk](https://www.thingiverse.com/thing:3444395)** > > Created a model of my favorite footwear and now i am inviting you to print the model yourself. > Please show me your remix' and prints > Want to add my to FB? Feel Free: https://www.facebook.com/creillypsnl ---
**Author:** ![PingSpike](https://greyarro.ws/user_avatar/greyarro.ws/pingspike/32/7393_2.png) [@PingSpike](https://greyarro.ws/u/PingSpike)\ **Post date:** [6 April 2022 20:56 UTC](https://greyarro.ws/t/found-any-cool-stl-files-share-them-here/41375/55 "2022-04-06T20:56:19Z")
That’s pretty cool though 😊 ---
**Author:** ![PingSpike](https://greyarro.ws/user_avatar/greyarro.ws/pingspike/32/7393_2.png) [@PingSpike](https://greyarro.ws/u/PingSpike)\ **Post date:** [6 April 2022 20:56 UTC](https://greyarro.ws/t/found-any-cool-stl-files-share-them-here/41375/56 "2022-04-06T20:56:41Z")
Which again is the same reason I don’t own a 3D printer 🙂 ---
**Author:** ![GunjaFPV](https://greyarro.ws/user_avatar/greyarro.ws/gunjafpv/32/72376_2.png) [@GunjaFPV](https://greyarro.ws/u/GunjaFPV)\ **Post date:** [7 April 2022 15:25 UTC](https://greyarro.ws/t/found-any-cool-stl-files-share-them-here/41375/57 "2022-04-07T15:25:14Z")
![PXL_20220407_133728992](https://d1q8cepst0v8xp.cloudfront.net/original/3X/9/4/94ccc95522c1d05b49629145f023d1199917b633.jpeg) These are sooo cool!! Love it 🙂 Wanna try that dragon you got… But… ---
**Author:** ![Yith](https://greyarro.ws/user_avatar/greyarro.ws/yith/32/134305_2.png) [@Yith](https://greyarro.ws/u/Yith)\ **Post date:** [7 April 2022 15:39 UTC](https://greyarro.ws/t/found-any-cool-stl-files-share-them-here/41375/58 "2022-04-07T15:39:24Z")
Oh… we’re on print-in-place then? Beat this. 🙂 [![](https://d1q8cepst0v8xp.cloudfront.net/original/3X/a/d/ad257305b6c9453161b24dad3df9a39497cf3610.jpeg "Print in Place Engine") ](https://www.youtube.com/watch?v=2AHpbFJejnY) [Previous page](https://greyarro.ws/t/found-any-cool-stl-files-share-them-here/41375.md?page=1) [Next page](https://greyarro.ws/t/found-any-cool-stl-files-share-them-here/41375.md?page=3)