Mavic Air 2s and Mini 3 with DJI fly App - Unable to take off Code 30064

Questions & Answers
4

What’s the firmware version?

** Code 10001: Camera malfunction. Repairs required. Contact DJI Support for assistance

  • All you can do is restart the drone. If it doesn’t help, replace or repair the Gimbal camera.

** Code 10016: Camera not calibrated. Image quality can be affected. Contact DJI Support for assistance.

  • Calibrate the camera, if the error persists - replace or repair the camera.

** Code 10022: No SD card. Insert sd card

  • Just insert or replace the card.

** Code 10023: SD card malfunction. Change card

  • Try pulling and inserting back. It did not help - change the SD card.

** Code 30007 & 30008: No GPS signal. Unable to hover. Fly with caution

  • Repair or replacement of the gps module is required.

** Code 30047: Barometer initialization failed. Restart aircraft

  • Follow the instructions of the DJI.

** Code 30049: GPS Module Error. Restart Aircraft

  • Restart the mavic mini. If it does not help, repair or replace the gps module.

** Code 30050: IMU calibration required. Calibrate IMU

  • In the settings, find the IMU calibration function and calibrate according to the instructions. If it does not help, repair or replace the gps module.

** Code 30055: IMU not calibrated. Calibrate IMU

  • Repeat the same steps as with the Code 30050 error.

** Code 30060: Compass error. Ensure there are no metal or magnetic objects near the aircraft and calibrate it before use.

  • If there are definitely no metal objects around mavic mini and calibration does not help - repair or replace the gps module.

** Code 30064: Unable to TakeOff.

  • Make sure that nothing prevents the drone from taking off and that you are in the area where flights are allowed. If all conditions are met, but the error remains - restart mavic mini. Doesn’t help - update the firmware. If again the error - need repair mavic mini ( but here it is need to understand which module is broken, the fastest is the problem in ESC module).

** Code 30168: Aircraft power insufficient. Fly with caution.

  • The error most often occurs in high winds, but it can be due to a worn battery or a faulty ESC module.

** Code 30210: Power system hardware. Restart aircraft

  • Reboot helps. If not, update the firmware.

** Code 30226: Start failed. Restart aircraft and DJI Fly App

  • Follow the instructions of the DJI.

** Code 40002: Gimbal stuck. Check whether gimbal cover is removed and ensure gimbal can rotate freely

  • Be careful. You can burn the suspension motors, if you forget to remove the cover.

** Code 40011: Gimbal calibration error. Restart aircraft.

  • Calibrate the gimbal in the settings. If calibration does not work, replace the gimbal.

** Code 40012: Gimbal unable to connect. Repairs required. Contact DJI Support for assistance.

  • Need to replace the gimbal. Watch the video how to do it.

** Code 40021: Gimbal IMU data error. Contact DJI Support for assistance

  • Repair or replace GPS module. Watch the video how to do it.

** Code 180016, 180031, 180030: sensor error. Contact DJI Support for assistance.

  • Try restarting the drone. If it does not help, the sensors are broken and must be replaced.
1 Like