do you reckon I can get away without using the 4 and 5 ways I don’t have a 3d printer or will the whole thing just fall over without
Hmmm. The last track needed a 4 way for sure though you could have left one hanging. You better off buying the elbows Ts etc.
Drop me a PM and can sort you out from 3d printed mate, I need to print a few more myself lol
What a legend , ive just ordered the pipes and fittings for collection this eve and the timer bits should be with me next week.
Im such a nerd but im quite excited haha
Am I right thinking they don’t care about the exact diameter of the pipes correct? I have a choice of 16mm / 20mm / 25mm – the link at the top of the thread shows some 21.5mm pipes but cannot find anything in the rules…
It’s lengths that count I do remember if you have fatter or thinner pipes you need to adjust for that
1 Like
I got everything just need the 4s and 5s connectors i didnt think about the feet so ive just set up a ladder with pylon and gate to get used to going down left and right i can only go smooth right atm
1 Like
Ill be ready for track 2
1 Like
Getting practice runs in , ive just flashed to bf 4.5 and am trying to find a good tune.
2 Likes
The tune you’ve used in your video is OK? Maybe some trance or hard house?
Seriously though… flashed a whoop… Eeek, hope you took a backup! Though plenty of decent tunes out there for them I guess! I don’t like flashing whoops if flying well!
Lot’s of decent laps there, well done, and nice to see you using the 3d printed bobs, hope they holding up OK!
That tune was ok but ive started again with 4.5 as they’ve changed angle and horizon mode quite a bit.
I’m trying a tune off the guy you beat in a race last year, something along the lines of boshua jardwell or something like that.
Ill get some hardstyle on the next vid just for you XD.
Flashing was a nightmare at first as even with my backup I had to redo the transmittor settings and sort out some mistakes I made during the flashing process like flashing both SD and HD OSDs to the FC … whoops you live and you learn I guess.
The connectors you made me are working perfect thanks again, I gave you a shoutout in the 3D print section of the forum.
1 Like
My very poor attempt at track 2 https://youtu.be/Smky3K45m5s?si=xrnneSVU2HAPGvDd
1 Like
You can even use an avata for it, no excuses, all you Avata guys!
1 Like
Absolutely great to see you give it a go mate! Well done! As never done this before awesome start, watch this back after track 8, and you’ll be like… wow… Actually reset the track up again after track 8 and see how you do! Keep at it, and it gets better (unless you use an Avata)
Great news guys… Lounge back (until Weds/Thursday and do it all again)!
And final one processed and up for this week. Track 3 is out, and now I’ve proved you can join in with the @group-dji-avata can all join in too now!
Anyways, my final submission for analogue and HD Tiny Whoops below (slightly lighter at 17g without battery than the avata!):
4 Likes
Reacting, nice to see your room back to normal 
1 Like
Is with track in place
https://youtu.be/aCDf6WAfMJE latest track practice for racegow3
1 Like
First session from me… Battery plug off again, so soldering iron out tonight, lol
1 Like
Very nice, love the tag line fly it like you stole it
Yer, he stole that from Mr.D 
1 Like