# Radiomaster Boxer setup

**URL:** <https://greyarro.ws/t/radiomaster-boxer-setup/86564>\
**Category:** Racing Quads, Self-builds & FPV\
**Created:** [14 November 2024 19:36 UTC](https://greyarro.ws/t/radiomaster-boxer-setup/86564 "2024-11-14T19:36:15Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![DavidFPV](https://greyarro.ws/letter_avatar_proxy/v4/letter/d/ecd19e/32.png) [@DavidFPV](https://greyarro.ws/u/DavidFPV)\
**Post date:** [14 November 2024 19:36 UTC](https://greyarro.ws/t/radiomaster-boxer-setup/86564/1 "2024-11-14T19:36:15Z")

</div>

Hi wonderful fountains of knowledge 👋

Looking for some detailed help here, I’m trying to set up my drone to a radiomaster Boxer and I’ve followed instructions manual, YouTube, oscar Laing and not having any luck. I got quite far with a YouTube video but then got lost on usb setup.

I downloaded a elrs configurator but my pc won’t open the .exe file so I’m really stumped…who knew building one of these would be so stressful 😔

If someone could guide me through it, I’d happily drop ship some beers to you via my drone.

Thanks  
David

---

<div class="post-metadata">

**Author:** ![bmsleight](https://greyarro.ws/letter_avatar_proxy/v4/letter/b/59ef9b/32.png) [@bmsleight](https://greyarro.ws/u/bmsleight)\
**Post date:** [14 November 2024 19:48 UTC](https://greyarro.ws/t/radiomaster-boxer-setup/86564/2 "2024-11-14T19:48:44Z")

</div>

HI David,

Such fun!

Q1 - Which drone are you trying to bind it to?  
Q2 - Do you know which receiver on the drone ?  
Q3 - Have you tried connecting to the ELRS receiver on the drone via its own hotspot - " `expresslrs` (This is my preferred method) ? Also this means you do not need the elrs configurator

> **[Wifi Updating - ExpressLRS](https://www.expresslrs.org/software/updating/wifi-updating/#method-1-hotspot)**
>
> ExpressLRS aims to provide the best completely open, high refresh radio control link while maintaining a maximum achievable range at that rate with low latency. Vast support of hardware in both 900 MHz and 2.4 GHz frequencies.

---

<div class="post-metadata">

**Author:** ![bmsleight](https://greyarro.ws/letter_avatar_proxy/v4/letter/b/59ef9b/32.png) [@bmsleight](https://greyarro.ws/u/bmsleight)\
**Post date:** [14 November 2024 19:52 UTC](https://greyarro.ws/t/radiomaster-boxer-setup/86564/3 "2024-11-14T19:52:19Z")

</div>

Further on hotspot.

Only power the flight controller via USB (Video transmitter will no be powered.). After about 2 mins a new wifi network should be available - …

Bartwell has the answer.

[![](https://d1q8cepst0v8xp.cloudfront.net/original/3X/4/c/4c7ee3442453aaad54df0e1a9907f34db645035a.jpeg "Easiest Way To Flash and Bind ExpressLRS!") ](https://www.youtube.com/watch?v=MFFUsN9ZHSU)

---

<div class="post-metadata">

**Author:** ![DavidFPV](https://greyarro.ws/letter_avatar_proxy/v4/letter/d/ecd19e/32.png) [@DavidFPV](https://greyarro.ws/u/DavidFPV)\
**Post date:** [15 November 2024 12:48 UTC](https://greyarro.ws/t/radiomaster-boxer-setup/86564/4 "2024-11-15T12:48:45Z")

</div>

Hey, appreciate the time to reply😊 I have built a 5" quad with a speedybee stack f405 V3.

I’ve managed to get it connected to beta flight, spun the motors etc so it works (surprisingly) firmware is uptl date too.

But binding it…damn, feels like a new language again. I’ll watch that video after work and see if I can make any sense with it!  
Thanks  
David

---

<div class="post-metadata">

**Author:** ![bmsleight](https://greyarro.ws/letter_avatar_proxy/v4/letter/b/59ef9b/32.png) [@bmsleight](https://greyarro.ws/u/bmsleight)\
**Post date:** [15 November 2024 13:23 UTC](https://greyarro.ws/t/radiomaster-boxer-setup/86564/5 "2024-11-15T13:23:27Z")

</div>

> [@DavidFPV](#):
>
> speedybee stack f405 V3

Don’t think this has an in build ELRS ?

---

<div class="post-metadata">

**Author:** ![Steviegeek](https://greyarro.ws/user_avatar/greyarro.ws/steviegeek/32/18587_2.png) [@Steviegeek](https://greyarro.ws/u/Steviegeek)\
**Post date:** [15 November 2024 15:21 UTC](https://greyarro.ws/t/radiomaster-boxer-setup/86564/6 "2024-11-15T15:21:22Z")

</div>

@DavidFPV  
Which part of the country are you in?  
Cheers Steve 🙂

---

<div class="post-metadata">

**Author:** ![DavidFPV](https://greyarro.ws/letter_avatar_proxy/v4/letter/d/ecd19e/32.png) [@DavidFPV](https://greyarro.ws/u/DavidFPV)\
**Post date:** [15 November 2024 18:26 UTC](https://greyarro.ws/t/radiomaster-boxer-setup/86564/7 "2024-11-15T18:26:03Z")

</div>

I’m in Teesside, Stevie. (Stockton to be precise)

---

<div class="post-metadata">

**Author:** ![DavidFPV](https://greyarro.ws/letter_avatar_proxy/v4/letter/d/ecd19e/32.png) [@DavidFPV](https://greyarro.ws/u/DavidFPV)\
**Post date:** [15 November 2024 18:27 UTC](https://greyarro.ws/t/radiomaster-boxer-setup/86564/8 "2024-11-15T18:27:08Z")

</div>

I attached a happy model (thing) to the FC too, guess this could make more sense?

---

<div class="post-metadata">

**Author:** ![bmsleight](https://greyarro.ws/letter_avatar_proxy/v4/letter/b/59ef9b/32.png) [@bmsleight](https://greyarro.ws/u/bmsleight)\
**Post date:** [16 November 2024 08:35 UTC](https://greyarro.ws/t/radiomaster-boxer-setup/86564/9 "2024-11-16T08:35:41Z")

</div>

Post some photos of what you have wired inay the moment

---

<div class="post-metadata">

**Author:** ![DavidFPV](https://greyarro.ws/letter_avatar_proxy/v4/letter/d/ecd19e/32.png) [@DavidFPV](https://greyarro.ws/u/DavidFPV)\
**Post date:** [16 November 2024 11:18 UTC](https://greyarro.ws/t/radiomaster-boxer-setup/86564/10 "2024-11-16T11:18:20Z")

</div>

![20241116_111702](https://d1q8cepst0v8xp.cloudfront.net/original/3X/d/2/d2c691dc566bd591fefdebea13281e9ed79a1b65.jpeg)  
This is my set up at the moment.

Does that help or do you need more specific photo?

---

<div class="post-metadata">

**Author:** ![bmsleight](https://greyarro.ws/letter_avatar_proxy/v4/letter/b/59ef9b/32.png) [@bmsleight](https://greyarro.ws/u/bmsleight)\
**Post date:** [16 November 2024 11:41 UTC](https://greyarro.ws/t/radiomaster-boxer-setup/86564/11 "2024-11-16T11:41:29Z")

</div>

> [@DavidFPV](#):
>
> This is my set up at the moment.

Nice

With the speedybee powered via USB - do you get the leds coming on the soldered ELRS receiver ?  
Does it to to hotspot mode after a minute ?

---

<div class="post-metadata">

**Author:** ![DavidFPV](https://greyarro.ws/letter_avatar_proxy/v4/letter/d/ecd19e/32.png) [@DavidFPV](https://greyarro.ws/u/DavidFPV)\
**Post date:** [16 November 2024 12:26 UTC](https://greyarro.ws/t/radiomaster-boxer-setup/86564/12 "2024-11-16T12:26:29Z")

</div>

I only get three lights on the FC one white, red and (blue flashing)

Nothing on the elrs receiver however it is soldered to the correct pads.

Should this have lights on without my transmitter turned on?  
Cheers  
David

---

<div class="post-metadata">

**Author:** ![Cedric](https://greyarro.ws/user_avatar/greyarro.ws/cedric/32/178184_2.png) [@Cedric](https://greyarro.ws/u/Cedric)\
**Post date:** [16 November 2024 13:07 UTC](https://greyarro.ws/t/radiomaster-boxer-setup/86564/13 "2024-11-16T13:07:35Z")

</div>

usually the pads marked 5V are powered by the main battery - but make sure to keep it short / or with a fan running on the quad.

the pad marked 4V5 will likely be the one that can also be powered by the USB (no need for the battery / fan)

---

<div class="post-metadata">

**Author:** ![DavidFPV](https://greyarro.ws/letter_avatar_proxy/v4/letter/d/ecd19e/32.png) [@DavidFPV](https://greyarro.ws/u/DavidFPV)\
**Post date:** [16 November 2024 14:56 UTC](https://greyarro.ws/t/radiomaster-boxer-setup/86564/14 "2024-11-16T14:56:46Z")

</div>

If someone could spare 20 mins for a call or online Google meet to run me through the remaining setup id be eternally grateful. Tried all day but I have no more avenues to try now.

---

<div class="post-metadata">

**Author:** ![bmsleight](https://greyarro.ws/letter_avatar_proxy/v4/letter/b/59ef9b/32.png) [@bmsleight](https://greyarro.ws/u/bmsleight)\
**Post date:** [16 November 2024 15:22 UTC](https://greyarro.ws/t/radiomaster-boxer-setup/86564/15 "2024-11-16T15:22:11Z")

</div>

> [@DavidFPV](#):
>
> Nothing on the elrs receiver however it is soldered to the correct pads.

What model is the ELRS reciever ?  
Normally all have LEDs

> [@Cedric](#):
>
> 5V are powered by the main battery

I put my money on Cedric - power it via main battery and does the ELRS now have LEDs ?

> [@Cedric](#):
>
> with a fan running on the quad.

YES! Put some air cooling when using the main battery

---

<div class="post-metadata">

**Author:** ![DavidFPV](https://greyarro.ws/letter_avatar_proxy/v4/letter/d/ecd19e/32.png) [@DavidFPV](https://greyarro.ws/u/DavidFPV)\
**Post date:** [16 November 2024 16:58 UTC](https://greyarro.ws/t/radiomaster-boxer-setup/86564/16 "2024-11-16T16:58:54Z")

</div>

Yes I e plugged it into the battery now and the elrs receiver has a green flashing led now, do you know what I need to do from here?

---

<div class="post-metadata">

**Author:** ![bmsleight](https://greyarro.ws/letter_avatar_proxy/v4/letter/b/59ef9b/32.png) [@bmsleight](https://greyarro.ws/u/bmsleight)\
**Post date:** [16 November 2024 17:50 UTC](https://greyarro.ws/t/radiomaster-boxer-setup/86564/17 "2024-11-16T17:50:17Z")

</div>

> [@DavidFPV](#):
>
> green flashing led

> **[LED Status - ExpressLRS](https://www.expresslrs.org/quick-start/led-status/)**
>
> The LEDs on both the ExpressLRS Receivers and Transmitter Modules are very helpful diagnostic tool in determining the current status of the device.

Wait for wifi statusaka hotspot and follow the video.

---

<div class="post-metadata">

**Author:** ![DavidFPV](https://greyarro.ws/letter_avatar_proxy/v4/letter/d/ecd19e/32.png) [@DavidFPV](https://greyarro.ws/u/DavidFPV)\
**Post date:** [16 November 2024 17:54 UTC](https://greyarro.ws/t/radiomaster-boxer-setup/86564/18 "2024-11-16T17:54:58Z")

</div>

So I’ve built, updated and flashed the firmware on both the transmitter and the receiver. Green light now stays on (I think it’s good) and they both see each other. Can’t see how to bind them or arm them anywhhere?

---

<div class="post-metadata">

**Author:** ![bmsleight](https://greyarro.ws/letter_avatar_proxy/v4/letter/b/59ef9b/32.png) [@bmsleight](https://greyarro.ws/u/bmsleight)\
**Post date:** [16 November 2024 18:07 UTC](https://greyarro.ws/t/radiomaster-boxer-setup/86564/19 "2024-11-16T18:07:44Z")

</div>

> [@DavidFPV](#):
>
> bind them or arm them anywhhere?

Solid light suggests it is binded.

Arming … I am presuming you are using beta flight.

What do you see on the receiver tab when you move any of the boxer switches or sticks ?

> **[Receiver Tab | Betaflight](https://betaflight.com/docs/wiki/configurator/receiver-tab)**
>
> A receiver is a device that (as its name suggests) receives data from a transmitter, usually your

---

<div class="post-metadata">

**Author:** ![Steviegeek](https://greyarro.ws/user_avatar/greyarro.ws/steviegeek/32/18587_2.png) [@Steviegeek](https://greyarro.ws/u/Steviegeek)\
**Post date:** [16 November 2024 19:35 UTC](https://greyarro.ws/t/radiomaster-boxer-setup/86564/20 "2024-11-16T19:35:10Z")

</div>

Arming switch MUST BE on channel for ELRS  
🙂

[Next page](https://greyarro.ws/t/radiomaster-boxer-setup/86564.md?page=2)
