This is the ringtone on my work phone, cuts out at the chorus.
quite appropriate “I have planned many projects but my fucks wont be involved” has been aimed at quire a few PMs in the past.
2 Likes
For my Avata 2 to help protect from jumping trees some new bumpers, I like how these clip on underneath.
Printed in PLA CF with 0.8 nozzle to avoid clogs.
And to protect the Goggle lenses in the case, as the battery pack is up against them.
Printed in 95A TPU, nice firm fit.
https://makerworld.com/en/models/964121-dji-goggles-3-lens-cover-protector#profileId-934323
11 Likes
We have a Wednesday group where I live and we just welcomed a new member with a DJI Mini 4K.
So I made these. Some our new members get from us, some are specific to the drones.
Set of skids that collapsed for storage
Gimble shroud for sunlight and general protection
Storage arms, top and bottom
A set of battery numbers and handy twist lock pot
A flat round accessory box
And a set of prop guards printed in PETG
4 Likes
Don’t forget to share the files
1 Like
A set of toggle switch covers for the Radiomaster TX15, I assume they will fit other Radiomaster models too.
These can be edited easily enough, by selecting the part and then clicking object tab in Bambu studio, you’ll then be able to add your letters / symbols.
I’ve used -
A= Arm / Disarm
M= Mode (Acro, Angle & Horizon
L= turns the LED gimble lights on / off
T= Turtle Mode
B= Buzzer
SWITCH COVERS - Radio Master.3mf.zip (124.5 KB)
5 Likes
https://makerworld.com/models/2617176?appSharePlatform=copy
https://makerworld.com/models/2030958?appSharePlatform=copy
https://makerworld.com/models/1003459?appSharePlatform=copy
Oops, sorry!
https://makerworld.com/models/1486408?appSharePlatform=copy
https://makerworld.com/models/1374733?appSharePlatform=copy
6 Likes
Thanks for all the links David @Keltoi 
1 Like
Simple key ring fob, made using Bambu MakerLab (upload an image and let the software do the work), quite impressed with the detail and how easy it was.
9 Likes
Easy one I know but just love this 2tone colour combo maybe don’t show up as well in photos but it orange and pink.. Just drying out some TPU for thee seal then complete …
3 Likes
But you forgot to share the files, it’s the rules
5 Likes
Strangely enough I’ve been stumbling around Thingiverse looking for a mini Peli style case.
Found this which seems quite close to Nick’s print.
Parametric too.
Waterproof Box - Fully Parameterized - 6033460 (1).zip (35.5 MB)
1 Like
For my Creality K2 Pro.
https://www.crealitycloud.com/model-detail/creality-new-logo-box?profileId=6a050006ee958f4a5cf920eb
Waiting on delivery of a couple of spare hot end units to complete.
1 Like
Oh right I didn’t know, first time I’ve posted anything, will sort tomorrow 
The cue is in the title
5 Likes
But I don’t play snooker 
5 Likes
Have a rest BigDog or you’ll end up getting framed 
1 Like
My my we are chalking them up on here
3 Likes
I’ll just leave this here because "I have a sudden urge to make a clean break “
4 Likes
After a meagre 16 years service, my kettle rendered itself useless when the utterly pointless clear plastic window in the lid crumbled and started dropping bits of plastic into the interior.
So, after I ordered a replacement on amazon, I did what anyone would do and set about designing a replacement part. A couple of prototypes later and I can use my kettle again.
Now I just have to decide whether I’m sending the new one straight back to amazon.
8 Likes