A thread to discuss firmware updates for the DJI Avata 360.
Tagging @group-dji-avata
4 Likes
Date: 2026.03.26
DJI Avata 360 Firmware: v01.00.0100
DJI RC 2 Firmware: v10.00.0100
DJI Goggles N3 Firmware: v01.00.0900
DJI Goggles 3 Firmware: v01.00.1300
DJI RC Motion 3 Firmware: v01.00.0200
DJI FPV Remote Controller 3 Firmware: v01.00.0300
DJI RC-N2 Firmware: v01.00.0100
DJI RC-N3 Firmware: v01.00.0100
DJI Fly App: v1.20.0
DJI Studio: v1.1.0
What’s New
• Added support for DJI FPV Remote Controller 3.
• Added Panorama Stitching Calibration.
• Added automatic detection for cycling and skiing subjects in FocusTrack.
• Added 2.7K 60/50/48/30/25/24fps video options in Single Lens mode.
• Increased the maximum horizontal flight speed in Sport mode to 18 m/s.
• When using head tracking with the goggles in 360° mode, improved tracking response latency and added roll angle control.
• Optimized the display of the tilt angle in the flight view when using FocusTrack > Spotlight > Free mode, allowing it to move up and down following the flight direction.
• Optimized the playback experience of 8K30 and above panoramic videos in Free View mode with goggles by reducing latency.
Notes
• Restart the aircraft, remote control device, and goggles after the firmware update is complete.
• Note that the firmware update may reset various flight parameters such as RTH Altitude and Maximum Flight Distance. Before updating, take note of your preferred settings and readjust them after the firmware update is complete.
• If the update fails, restart the aircraft, remote control device, goggles, and the DJI Fly app or DJI Assistant 2 (Consumer Drone Series), and try again.
Tagging @group-dji-avata
4 Likes
Date: 2026.04.23
DJI Avata 360 Firmware: v01.00.0200
DJI RC 2 Firmware: v10.00.0300
DJI Goggles N3 Firmware: v01.00.0900
DJI Goggles 3 Firmware: v01.00.1300
DJI RC Motion 3 Firmware: v01.00.0200
DJI FPV Remote Controller 3 Firmware: v01.00.0300
DJI RC-N2 Firmware: v01.00.0200
DJI RC-N3 Firmware: v01.00.0200
DJI Fly App: v1.21.0
DJI Studio: v1.1.0
What’s New
- Fixed some known issues.
Notes
-
Restart the aircraft, remote control device, and goggles after the firmware update is complete.
-
Note that the firmware update may reset various flight parameters such as RTH Altitude and Maximum Flight Distance. Before updating, take note of your preferred settings and readjust them after the firmware update is complete.
-
If the update fails, restart the aircraft, remote control device, goggles, and the DJI Fly app or DJI Assistant 2 (Consumer Drone Series), and try again.
Tagging @group-dji-avata
4 Likes
Date: 2026.06.23
DJI Avata 360 Firmware: v01.00.0300
DJI RC 2 Firmware: v10.00.0700
DJI Goggles N3 Firmware: v01.00.1000
DJI Goggles 3 Firmware: v01.00.1400
DJI RC Motion 3 Firmware: v01.00.0200
DJI FPV Remote Controller 3 Firmware: v01.00.0300
DJI RC-N2 Firmware: v01.00.0200
DJI RC-N3 Firmware: v01.00.0200
DJI Fly App: v1.21.4
DJI Studio: v1.1.20
What’s New
-
Added support for 4K@100fps video recording in 360° mode.
-
Added photo capture in Single Lens mode.
-
Added support for automatically displaying Vision Assist when flying with DJI FPV Remote Controller 3.
-
Added gimbal center calibration.
-
Optimized descent speed when flying horizontally along a slope to prevent the aircraft from drifting away.
-
Added high-precision intelligent stitching for editing panoramic videos in the DJI Fly app.
-
Fixed some known issues.
Notes
-
Restart the aircraft, remote control device, and goggles after the firmware update is complete.
-
Note that the firmware update may reset various flight parameters such as RTH Altitude and Maximum Flight Distance. Before updating, take note of your preferred settings and readjust them after the firmware update is complete.
-
If the update fails, restart the aircraft, remote control device, goggles, and the DJI Fly app or DJI Assistant 2 (Consumer Drone Series), and try again.
Tagging @group-dji-avata
6 Likes
4 posts were merged into an existing topic: Today, I have mostly been…
Took 22 minutes with RC2 and gigabit broadband No need to do all batteries this time!
3 Likes
Date: 2026.07.16
DJI Avata 360 Firmware: v01.00.0500
DJI RC 2 Firmware: v10.00.0700
DJI Goggles N3 Firmware: v01.00.1000
DJI Goggles 3 Firmware: v01.00.1400
DJI RC Motion 3 Firmware: v01.00.0200
DJI FPV Remote Controller 3 Firmware: v01.00.0300
DJI RC-N2 Firmware: v01.00.0200
DJI RC-N3 Firmware: v01.00.0200
DJI Fly App: v1.21.4
DJI Studio: v1.1.20
What’s New
- Fixed some known issues.
Notes
-
Restart the aircraft, remote control device, and goggles after the firmware update is complete.
-
Note that the firmware update may reset various flight parameters such as RTH Altitude and Maximum Flight Distance. Before updating, take note of your preferred settings and readjust them after the firmware update is complete.
-
If the update fails, restart the aircraft, remote control device, goggles, and the DJI Fly app or DJI Assistant 2 (Consumer Drone Series), and try again.
Tagging @group-dji-avata
3 Likes
Date: 2026.09.01
DJI Avata 360 Firmware: v01.00.0600
DJI RC 2 Firmware: v10.00.0800
DJI Goggles N3 Firmware: v01.00.1100
DJI Goggles 3 Firmware: v01.00.1500
DJI RC Motion 3 Firmware: v01.00.0200
DJI FPV Remote Controller 3 Firmware: v01.00.0300
DJI RC-N2 Firmware: v01.00.0200
DJI RC-N3 Firmware: v01.00.0200
DJI Fly App: v1.21.10
DJI Studio: v1.2.5
What’s New
- Fixed some known issues.
Notes
-
Restart the aircraft, remote control device, and goggles after the firmware update is complete.
-
Note that the firmware update may reset various flight parameters such as RTH Altitude and Maximum Flight Distance. Before updating, take note of your preferred settings and readjust them after the firmware update is complete.
-
If the update fails, restart the aircraft, remote control device, goggles, and the DJI Fly app or DJI Assistant 2 (Consumer Drone Series), and try again.
Tagging @group-dji-avata
3 Likes