DJI Avata Firmware updates

Modifications
1

A thread to discuss firmware updates for the DJI Avata.

Tagging @group-dji-avata

2 Likes
2

Date: 2022.08.25

Aircraft Firmware: v01.01.0000

Goggles 2 Firmware: v01.01.0000

DJI FPV Goggles V2 Firmware: v01.03.0000

Motion Controller Firmware: v02.00.0400

Remote Controller Firmware: v02.00.0200

DJI Fly App iOS: v1.7.0

DJI Fly App Android: v1.7.0

What’s New?

  • Added the ability to customize the camera’s auto ISO limit in auto mode.
  • Added embedding gyroscope data in the recorded video on the aircraft. (EIS needs to turn off, and thecamera FOV is set to Wide)
  • Added reminder when the aircraft is in low-power state.
  • Added orientation indicator when using the Head Tracking function with DJI Goggles 2.
  • Added manual channel mode for transmission and photo mode for camera when using DJI FPV Goggles V2.
  • Added orientation guidance for motion controller.
  • Optimized flight experience when using motion controller.

Notes:

  • Restart the aircraft, remote controller, and goggles after the update is complete.
  • Note that the update may reset various flight parameters such as the RTH altitude and the maximum flightdistance. Before updating, take note of your preferred settings and readjust them after the update.
  • If update fails restart the aircraft, remote controller, goggles, and DJI Fly or DJI Assistant 2 (Consumer Drones Series), and try again.

Tagging @group-dji-avata

3

Date: 2022.09.14

Aircraft Firmware: v01.01.0200

Goggles 2 Firmware: v01.01.0000

DJI FPV Goggles V2 Firmware: v01.03.0000

Motion Controller Firmware: v02.00.0400

Remote Controller Firmware: v02.00.0200

DJI Fly App iOS: v1.7.0

DJI Fly App Android: v1.7.0

What’s New?

  • Optimized flight safety

Notes:

  • Restart the aircraft, remote controller, and goggles after the update is complete.
  • Note that the update may reset various flight parameters such as the RTH altitude and the maximum flightdistance. Before updating, take note of your preferred settings and readjust them after the update.
  • If update fails restart the aircraft, remote controller, goggles, and DJI Fly or DJI Assistant 2 (Consumer Drones Series), and try again.

Tagging @group-dji-avata

4

Date: 2022.11.22

Aircraft Firmware: v01.01.0200

Goggles 2 Firmware: v01.02.0000

DJI FPV Goggles V2 Firmware: v01.04.0000

Motion Controller Firmware: v02.00.0400

Remote Controller Firmware: v02.00.0200

DJI Fly App iOS: v1.7.0

DJI Fly App Android: v1.7.0

What’s New?

  • Added support to use the goggles with DJI O3 Air Unit
  • Added support to use Canvas mode with the googles when using DJI O3 Air Unit.
  • Optimized prompts when using the goggles in some scenarios.
  • Added the ability for DJI Goggles 2 to enter hibernation mode after being idle for a long time (approximately eight minutes) when powered on. Wake up the goggles by pressing the link button.
  • Optimized the control guidance when using DJI Goggles 2.
  • Optimized the video transmission experience in broadcast mode for both pilot and audience when usingDJI Goggles 2.

Notes:

  • Restart the aircraft, remote controller, and goggles after the update is complete.
  • Note that the update may reset various flight parameters such as the RTH altitude and the maximum flightdistance. Before updating, take note of your preferred settings and readjust them after the update.
  • If update fails restart the aircraft, remote controller, goggles, and DJI Fly or DJI Assistant 2 (Consumer Drones Series), and try again.

Tagging @group-dji-avata

5

Date: 2022.12.08

Aircraft Firmware: v01.02.0000

Goggles 2 Firmware: v01.03.0000

DJI FPV Goggles V2 Firmware: v01.05.0000

Motion Controller Firmware: v02.00.0500

Remote Controller Firmware: v02.00.0400

DJI Fly App iOS: v1.8.0

DJI Fly App Android: v1.8.0

What’s New?

  • Added support for Remote ID requirements in the United States.
  • Added ability to detect abnormal attitude and brake automatically when the aircraft turns sharply at highspeed with an altitude of more than 5 m in Manual mode.
  • Added ability to cancel the countdown for low battery RTH by pressing the brake button.
  • Added support for the aircraft to record video at 4K@30fps, 2.7K@30fps, and 1080p@30fps. When used with DJI Goggles 2, 2.7K@120fps and 1080p@120fps are also available.
  • Added ability to transfer data from the aircraft storage to the microSD card. Go to Settings > Camera in the goggles menu to use this function.
  • Added ability to set sharpness and noise reduction parameters. Go to Settings > Camera > Advanced Camera Settings in the goggles menu to set the parameters.
  • Improved D-Cinelike to 10bit, providing more possibilities for post-processing.
  • Optimized flight stability in some scenarios.
  • Optimized the video transmission fluency in broadcast mode.

Notes:

  • Restart the aircraft, remote controller, and goggles after the update is complete.
  • Note that the update may reset various flight parameters such as the RTH altitude and the maximum flightdistance. Before updating, take note of your preferred settings and readjust them after the update.
  • If update fails restart the aircraft, remote controller, goggles, and DJI Fly or DJI Assistant 2 (Consumer Drones Series), and try again.

Tagging @group-dji-avata