A thread to discuss firmware updates for the DJI Neo.
Tagging @group-neo
3 Likes
Date: 2024.09.05
-
DJI Neo Firmware: V01.00.0100
-
DJI RC-N3 Remote Controller Firmware: V01.03.0100
-
DJI Goggles 3 Firmware: V01.00.0400
-
DJI RC Motion 3 Firmware: V01.00.0200
-
DJI FPV Remote Controller 3 Firmware: V01.00.0300
-
DJI RC 2 Remote Controller Firmware: V02.07.0000
-
DJI RC-N2 Remote Controller Firmware: V01.03.0100
-
DJI Fly App: V1.14.0
-
What’s New
• Added support for DirectionTrack, recording audio via app, and voice control when using Mobile App Control.
• Added support for DJI Goggles 3, DJI RC Motion 3, and DJI FPV Remote Controller 3.
• Added support for DJI RC 2 and DJI RC-N2 remote controller.
• Optimized overall image quality.
• Fixed some known issues.
1 Like
Already wow, mine arrives tomorrow
1 Like
There’s always an update on release. It contains all the feedback and bug fixing from their testing people who’ve probably had them for the last couple of months.
3 Likes
Nice to know, will be updating when mine arrives later today 
Had a ÂŁ50 voucher for Amazon so only paid 119 
Got the Avata2 so no need for any controllers and will probably end up getting the Air3s so that’ll be the rcn3 sorted too 
4 Likes
DJI have just updated their web site with the details of the .0200 firmware from last week. Adding here to make it searchable on the forum.
Date: 2024.09.14
Aircraft Firmware: v01.00.0200
DJI RC-N3 Remote Controller Firmware: V01.03.0100
DJI Goggles 3 Firmware: V01.00.0400
DJI RC Motion 3 Firmware: V01.00.0200
DJI FPV Remote Controller 3 Firmware: V01.00.0300
DJI RC 2 Remote Controller Firmware: V02.07.0000
DJI RC-N2 Remote Controller Firmware: V01.03.0100
DJI Fly App: V1.14.2
What’s New
• Fixed some known issues.
Notes:
• Restart the aircraft, remote control device, and goggles after the firmware update is complete.
• Note that the firmware update may reset various flight parameters such as RTH Altitude and Maximum Flight Distance. Before updating, take note of your preferred settings and readjust them after the firmware update is complete.
• If the update fails, restart the aircraft, remote control device, goggles, and the DJI Fly app or DJI Assistant 2 (Consumer Drone Series), and try again.
3 Likes
Overview
- Date:2024.09.29
- DJI Neo Firmware: V01.00.0300
- DJI RC-N3 Remote Controller Firmware: V01.03.0100
- DJI Goggles 3 Firmware: V01.00.0400
- DJI RC Motion 3 Firmware: V01.00.0200
- DJI FPV Remote Controller 3 Firmware: V01.00.0300
- DJI RC 2 Remote Controller Firmware: V02.07.0000
- DJI RC-N2 Remote Controller Firmware: V01.03.0100
- DJI Fly App: V1.14.2
What’s New
- Optimized positioning performance.
- Fixed some known issues.
Notes
- Restart the aircraft, remote control device, and goggles after the firmware update is complete.
- Note that the firmware update may reset various flight parameters such as RTH Altitude and Maximum Flight Distance. Before updating, take note of your preferred settings and readjust them after the firmware update is complete.
- If the update fails, restart the aircraft, remote control device, goggles, and the DJI Fly app or DJI Assistant 2 (Consumer Drone Series), and try again.
1 Like
Date: 2024.11.06
DJI Neo Firmware: v01.00.0400
DJI RC-N3 Remote Controller Firmware: V01.03.0200
DJI Goggles N3 Firmware: V01.00.0200
DJI Goggles 3 Firmware: V01.00.0600
DJI RC Motion 3 Firmware: V01.00.0200
DJI FPV Remote Controller 3 Firmware: V01.00.0300
DJI RC 2 Remote Controller Firmware: V04.01.0000
DJI RC-N2 Remote Controller Firmware: V01.03.0100
DJI Fly App: V1.15.2
What’s New
- Added support for DJI Goggles N3.
- Added liveview stabilization when used with DJI Goggles N3 or DJI Goggles 3.
- Added support for vertical shooting. Select the corresponding ratio in resolution settings for this mode.
- In Mobile App Control, added support for manual control in full screen and control stick mode switch in Control settings.
- Added support for audio recording via app when using the DJI RC-N3 or DJI RC-N2 remote controller Go to
...> Camera to enable the function. - Supported to set the noise reduction effect for audio recording to a natural style to preserve ambient sounds.
- Optimized positioning performance and increased flight speed during tracking.
- Fixed some known issues.
Notes:
• Restart the aircraft, remote control device, and goggles after the firmware update is complete.
• Note that the firmware update may reset various flight parameters such as RTH Altitude and Maximum Flight Distance. Before updating, take note of your preferred settings and readjust them after the firmware update is complete.
• If the update fails, restart the aircraft, remote control device, goggles, and the DJI Fly app or DJI Assistant 2 (Consumer Drone Series), and try again.
1 Like
Just updated the firmware on my Neo & rcn3 controller (this afternoon). Bored so I thought I’d give it a little fly in house. Set it off near window so it could fix gps. Took off, rose to a little over a meter the flipped over and crashed to ground. Looking at phone on my controller it showed a pic of neo with left side props highlighted in red saying they were installed incorrectly. Odd as I’ve been flying it since I got it new in August without issue. Removed prop guard gave them all a little twiddle, replaced and tried again. This time no problem and flew around ok. Weird!
Maybe one of the props, had become twisted / tucked into the prop guards.
The on screen message, is usually “check props are installed correctly” - I also give each prop a little turn before powering drone on, that way you know they are able to spin freely. 
2 Likes