DJI O4 Air Unit Firmware updates

Modifications & Firmware Updates
1

A thread to discuss firmware updates for the DJI O4 Air Unit

1 Like
2

Overview

  • Date: 2025.01.09
  • DJI O4 Air Unit Firmware: v01.00.01.00
  • DJI O4 Air Unit Pro Firmware: v01.00.01.00
  • DJI Goggles Integra Firmware: v01.07.00.00
  • DJI Goggles 2 Firmware: v01.11.00.00
  • DJI Goggles 3 Firmware: v01.00.07.00
  • DJI Goggles N3 Firmware: v01.00.03.00
  • DJI FPV Remote Controller 3 Firmware: v01.00.03.00
  • DJI FPV Remote Controller 2 Firmware: v02.00.11.00

What’s New

  • Added support to use with DJI FPV Remote Controller 2 when using with DJI Goggles Integra or DJI Goggles 2.
  • Fixed some minor bugs.

Notes:

  • Restart the air unit, the remote controller, and goggles after the update is complete.
  • If update fails, restart the air unit and DJI Assistant 2 (Consumer Drones Series), then try again.
1 Like
4

Just updated my O4 Au, found I needed the very latest consumer drones 2 app on pc. Previous version did support goggles 3 but not O4… Other than that all good.

1 Like
5

Saying all good! I believe beta flight osd compatible is available for use on I nav FC’s? I can not get any osd on the O4 pro as I can on the O3 system running goggles 3 with beta flight comp set up in OSD tab in configurator. Any help please…

6

Overview

  • Date: 2025.03.06
  • DJI O4 Air Unit Firmware: v01.00.02.00
  • DJI O4 Air Unit Pro Firmware: v01.00.02.00
  • DJI Goggles Integra Firmware: v01.08.00.00
  • DJI Goggles 2 Firmware: v01.12.00.00
  • DJI Goggles 3 Firmware: v01.00.08.00
  • DJI Goggles N3 Firmware: v01.00.04.00
  • DJI FPV Remote Controller 3 Firmware: v01.00.03.00
  • DJI FPV Remote Controller 2 Firmware: v02.00.11.00

What’s New

  • Added support for the INAV OSD feature when used with DJI Goggles Integra, DJI Goggles 2, DJI Goggles N3, or DJI Goggles 3.
  • Fixed some minor bugs.

Notes:

  • Restart the air unit, the remote controller, and goggles after the update is complete.
  • If update fails, restart the air unit and DJI Assistant 2 (Consumer Drones Series), then try again.
1 Like
7

DJI have released an update for the O4 Air Unit (Lite & Pro models)

DJI O4 Air Unit Series Release Notes

Date: 2025.06.11

DJI O4 Air Unit Firmware: DJI O4 Air Unit Pro Firmware: v01.00.03.00

v01.00.03.00

What’s New

• Fixed some minor bugs.

Notes:

• Restart the air unit, the remote controller, and goggles after the update is complete.

• If update fails, restart the air unit and DJI Assistant 2 (Consumer Drones Series), then try again.

DJI_O4_Air_Unit_Series_Release_Notes_en.pdf (70.5 KB)

According to Ian (MadTech) this resolves the VTX MB rate issue with the Goggles 2 & Integra.
The issue (now resolved) was that the VTX power was limited to 15-16 mb when the Ham file hack was installed in the goggles.

IMG_2431
IMG_24311248×779 79 KB

1 Like
8

Thanks for all the update details Jason :smiley:

I’ve moved your post in to the main O4 firmware thread :slight_smile:

1 Like