Interesting, I think the dropbox app had closed on the computer and didn’t sync the other versions I had uploaded… Check now please.
But as I said before… I’m happy to just have the ones you printed out already, along with the other parts (canopy, spacer, adapter and adapter plate),
You’ve added fillets to you V3 which makes it similar to my remix, I’ll Print it too, you might as well have it to see which is best.
I had originally remixed to this, then deleted some of the fillets…I’m just about to slice you V3 now…
1 Like
Awesome!!! Thx a bunch dude!!! DM’ing details…
Didn’t realize the membership had kicked in already, so I can’t DM yet. Give me a few minutes to sort this out and I’ll DM you…
Hello,
Me again !! lol
After I got @Njoro 's prints and put everything together, I noticed that the stack was a bit on the tall and especially heavy side (build would require 8 “long” screws plus the adapter plate in addition to all electronics, frame and etc). So in order to Lose a bit of the fat, I looked for something a bit more streamlined for the setup I’m putting together, and hence would need help once again with a bit of printing from the wizards herein…
The zip file attached has 3 files
- Canopy - material: TPU - qty.:1 print
- Spacers - material: PLA/PLA+ or anything along those lines - qty.:12 prints
- T-mount adapter - material: PLA/PLA+ or anything along those lines - qty.:10 prints
Would be thankful if someone could print it all out and mail it over (will cover your expenses off course)
Thank you!
Toothickconversion.zip (245.9 KB)
Since no one else has offered, I’ll have a look, I’ve got quite a busy week so might not print until the weekend.
1 Like
Nice one…tks @Njoro !!
@Njoro
If you are stuck for time I can pick this job up
I’ll let you know…
Tks for chiming in Steve. Lets see what @Njoro replies after assessing his schedule…
Some done, loaded between coffee break….
2 Likes
That’s your idea of a coffee? I wanna join your club! 
1 Like
3 Likes
The white frog…lol
Tks a lot for those @Njoro !!
1 Like
Either I’m the only one with no printer or people just haven’t been needing much stuff these days… 
Well, I’ve been looking over the Turtle fitting on the toothpick frame and have thought of some options to try and make it more low profile, and hopefully lighter…
Would be extremely thankful if someone could help me print the stuff on the attached zip and send it may way on mail.
(I’ll cover the costs and etc…)
It’s a couple of canopy variations I made from scratch on Tinkercad, an adapter plate, and a couple of spacers.
The canopies to be printed in TPU, 1 print of each.
The adapter plate to be printed in PLA (or similar), 1 print.
The spacers to be printed on PLA (or similar), 8 prints of each size (16 total).
Thank you!
Toothickconversion.zip (420.4 KB)
1 Like
I’ll have a look later tonight
Will let you know in the morning
2 Likes
Thats great, tks Steve!!!
1 Like
20x20 adaptor, PLA / PETG.
Canopy, base looks interesting, more supports than model !, will try it but no guarantees, TPU.
Canopy V2, base looks better, will try it but no guarantees, TPU.
Spacers 1mm & 2mm, should be OK 
PLA or PETG.
Colour choices:
PLA or PETG: White, Black, Red, Blue
TPU: Blue, Green, Orange, Black
Let me know 
1 Like
Tks for having a look at it… I have no clue how to design something for 3d printing, so that should explain what you see there. Hopefully it works out.
For the PLA/PTEG stuff, you can use Red.
For the TPU, the Orange is fine (I quite like the green, but this being the canopy and me flying a lot over grass, wouldn’t be a good combination 
)