Added support for taking five 48MP photos when using AEB and Burst Shooting.
Added AR Home Point, AR Return-to-Home Route, and AR Aircraft Shadow.
Added support for manually setting the Max Horizontal Speed in Normal mode to 15 m/s.
Added support for DJI Goggles 2, DJI Goggles Integra, and DJI RC Motion 2. Visit DJI Air 3 - Downloads - DJI and refer to the Consumer Drones and Goggles Compatibility Information for more information.
Notes:
Make sure to update the firmware of the aircraft, goggles, and motion controller before linking. The user can use DJI Assistant 2 (Consumer Drone Series) to update the firmware of each device individually, or use the DJI Fly app to update the firmware:
– a. Aircraft: Update the firmware with the remote controller.
– b. Goggles and Motion Controller: Power on the goggles and the motion controller. Connect the USB-C port of the goggles to a mobile device, run DJI Fly, and select Profile > Device Management. Locate the corresponding goggles. Select Firmware Update and follow the on-screen instructions to update the firmware.
Camera settings will be reset after firmware update. Check the camera settings in DJI Fly.
If update fails, restart aircraft, remote controller, and DJI Fly or DJI Assistant 2 (Consumer Drones Series),and retry.
Make sure to update the firmware of the aircraft, goggles, and motion controller before linking. The user can use DJI Assistant 2 (Consumer Drone Series) to update the firmware of each device individually, or use the DJI Fly app to update the firmware:
a. Aircraft: Update the firmware with the remote controller.
b. Goggles and Motion Controller: Power on the goggles and the motion controller. Connect the USB-C port of the goggles to a mobile device, run DJI Fly, and select Profile > Device Management. Locate the corresponding goggles. Select Firmware Update and follow the on-screen instructions to update the firmware.
Camera settings will be reset after firmware update. Check the camera settings in DJI Fly.
If update fails, restart aircraft, remote controller, and DJI Fly or DJI Assistant 2 (Consumer Drones Series), and retry.
Added Vision Positioning and Obstacle Sensing switch.
Added Sphere Panorama for the medium tele camera.
Added support for civil uncrewed aircraft owners to register their aircraft with CAAC using their real names to comply with the uncrewed aircraft-related regulations in China.
Added support for Front Arm LED settings in the EASA member states and the UK.
Added support to make camera parameter settings unaffected by firmware updates. This function will only work if the aircraft firmware is v01.00.06.00 or above before an update occurs.
Optimized battery auto-discharge strategy.
Fixed some known issues.
Notes:
Added features require DJI Fly v1.12.4 or later.
If update fails, restart aircraft, remote controller, and DJI Fly or DJI Assistant 2 (Consumer Drones Series), and retry.
Bizarre as it sounds, try hot spotting to your mobile phone and have your mobile phone use the mobile network (ie. don’t have your mobile simply relay over your home wifi).
I had this message the other day, I posted in the forum somewhere,
Try taking it outside ( not connected to WiFi ) turn everything on as is yr going to fly, only when you have full GPS lock then go into fly safe update & try to update it, fingers crossed it should get rid of it
Added support for DJI Goggles 3 and DJI RC Motion 3. Visit DJI Air 3 - Downloads - DJI and refer to the Consumer Drones and Goggles Compatibility Information (for DJI Goggles 3) for more information.
Added support for Israel Remote ID requirements.
Notes:
Added features require DJI Fly v1.13.0 or later.
If update fails, restart aircraft, remote controller, and DJI Fly or DJI Assistant 2 (Consumer Drones Series),
and retry.
