Dual gimbal with M210 issue

Questions & Answers
1

I hope someone here may be able to assist, I’ve looked on the useless DJI forums to no avail…

I have a M210 and just fitted the dual camera gimbal today. I have previously been using the single downward gimbal and switching between a Z30 and X4S but finally got round to fitting the dual mount today.

Both cameras spin up on power up. I have seen some notes about the X4S needing to be mounted in position 1 (due to SD card onboard) so this leaves the Z30 in position 2.

Here’s the problem: I cannot see both cameras in either DJI Go 4 or DJI Pilot apps (using Cendence and Crystal Sky). The FPV camera remains as the only other video feed.

Thanks very much for any help.

2

I’ve done some more investigation and if I tilt the drone left and right, the gimbal in position 1 will self level but the gimbal in position 2 does not.

Appears to be something very fundamentally wrong with position 2…

3

Is it even getting power? :thinking:

4

Yes, I think so as it does the pan and tilt (full extents) on power up.

5

I’m off to see the team at Coptrz with this tomorrow. Will let you know what the outcome was.

6

Looks like it is a faulty video board. It has to go back to DJI in Holland.

1 Like
7

:confused: